Duolabs Spa QBox HD User's Guide download pdf (Page 78)

QBox High Definition User Guide Page 78 of 99

11.1.4 Four satellites via DiSEqC A/B/C/D (DVB-S)

Use this type of configuration if you want to receive four satellites from one Single Universal or Twin

Universal LNB for four or eight parties. It does not matter if you use one or two dishes to achieve this.

In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax

cabled to the satellite receivers (QBoxes) in your household.

Please read the section 11.1 DVB-S configuration to learn how to get into this menu.

The “Satconfig” menu will open up.

Use the up/down-Buttons to navigate to the

“DiSEqC-Mode” option and use the left/right-

Buttons to select “DiSEqC A/B/C/D”.

For Ports A, B, C and D select the desired

satellites just as described in the Single

satellite – direct connection section.

Make sure you know which satellite is

connected to which input on the Toneburst

switch.

If you do not find any services in the

transponder scan later, exchange the two

satellites in this list and try again.

Press the OK-Button to save your settings.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 98 99

No comments

Duolabs Spa QBox HD User's Guide Page 78