QBox High Definition User Guide Page 80 of 99
11.1.6 Stab Positioner without USALS (DVB-S)
Use this type of configuration if you want to receive many satellites without a Stab positioned from a
Single Universal LNB. The coax cable is directly connected from you QBox to the LNB.
Please read the section 11.1 DVB-S configuration to learn how to get into this menu.
The “Satconfig” menu will open up.
Using the Navigations-Buttons left/right
to select the “advanced” configuration.
Navigate to the option “Satellite”.
Use to the Navigation-Buttons left and
right to select the desired satellite and.
Navigate to the option “Satellite” and
press the Navigation-Button right.
Use the up/down-Buttons to navigate to
the “DiSEqC-Mode” option and use the
left/right-Buttons to select “1.2“.
Navigate to the option “Use Usals for this
sat” and change the setting to “no” using
the Navigation-Buttons left and right.
Navigate to the option “Stored position“
and enter position of the selected satellite
which is saved in the positioner by using
the Numeric Keypad.
Refer to the instruction manual or your
positioner for the number of the saved
position.
Comments to this Manuals