Duolabs Spa QBox HD User's Guide download pdf (Page 69)

QBox High Definition User Guide Page 69 of 99

Use the Navigation-Buttons and the Numeric-Keypad to change the values.

Use DHCP:

If enabled your QBox will get its IP from a DHCP server. If you are using a router to access the

internet you usually have a DHCP server. Disable this option to set a static IP address.

IP Address:

Enter the IP address here.

Netmask:

Enter the subnet mask (Usually 255.255.255.0).

Gateway:

Enter the router’s IP address here, if the QBox is connected to the Internet over a router.

Nameserver:

Enter the DNS-Server’s IP address here. DNS is used to translate a Domain name to an IP address.

Normally, if the Type is set to LAN, there is no need for a DNS entry. If the QBox is connected to

the Internet over a router, enter the router’s IP address here.

Activate the network:

Press the OK-Button to save the setting and activate the network.

Nameserver Setup

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.

Navigate to the option “Setup” and press the OK-Button to select.

1. Navigate to the option “System” and press the OK-Button.

 The “System” menu will open up.

2. Navigate to the option “Network…” and press the OK-Button.

3. Navigate to the option “Nameserver setup…” and press the OK-Button.

Nameserver:

Enter the DNS-Server’s IP address of your LAN here. DNS is used to translate a Domain name to an

IP address. Normally, if the Type is set to LAN, there is no need for a DNS entry. If the QBox is

connected to the Internet over a router, enter the router’s IP address here.

Press the green Options-Button if you want to add a seconds nameserver.

You can enter a maximum of two nameservers.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 98 99

No comments

Duolabs Spa QBox HD User's Guide Page 69