Duolabs Spa QBox HD User's Guide download pdf (Page 65)

QBox High Definition User Guide Page 65 of 99

These options are only available if the output type is set to “Scart”:

Mode: Scart

Select the standard supported by your TV screen. This is usually either PAL or NTSC. If you own a

TV screen which supports both modes you can also select the Multi option. You TV screen will

automatically switch depending on the input signal. These options are only available if the output type

is set to “Scart”.

Aspect ratio:

Automatic (Standard)

4:3 shows will be shown as 4:3 and 16:9 shows will be shown as 16:9.

4:3

Display 16:9 content as:

Letterbox

16:9 programs will be displayed on 4:3 TV’s with black beams at top and bottom.

Pan&Scan

16:9 programs will be zoomed to full height on 4:3 TV’s, parts of the picture on the left and right side

will cut off.

Just Scale

4:3 shows will be shown in full height on a 16:9 screen and are stretched to fit the width of your

screen.

16:9 and 16:10:

Display 4:3 content as:

Please see previous page.

Color format:

- CVBS (FBAS),

- RGB (Red, Green, Blue separated),

- SVideo (Color- and Brightness signal separated)

You are taken back to the “System“ menu.

WSS on 4:3:

Check the checkbox to disable zooming on some 16:9 TV’s during 4:3 transmissions.

Press the green Options-Button to save the setting or the red Options-Button to discard them.

Note!

Please keep in mind the possible settings of your TV. Some 16:9 TVs automatically zoom on

4:3 content to give you a full screen picture. Refer to your TV’s instruction manual for

reference.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 98 99

No comments

Duolabs Spa QBox HD User's Guide Page 65