QBox High Definition User Guide Page 70 of 99
10.8 Wi-Fi Configuration
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.
Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “System” and press the OK-Button.
2. The “System” menu will open up.
3. Navigate to the option “Network…” and press the OK-Button.
This screen will appear if the Wi-Fi Module is
correctly installed (see Appendix “A” chapter 14).
If the standard Network Screen will appear
(see Appendix “A” chapter 10.7). it means that the
Wi-Fi module has not been installed
correctly. Please check the installation again.
Press on Wireless tag to enter the next menu.
(Please note that the red cross “X” beside “Wireless will
become a green “V” right after the first successful wireless
configuration)
Adapter Settings: Explained afterward
Nameserver settings: DNS server IP.
Network test: LAN Adapter, Local Connect,
DHCP, IP Address, Name Server tester.
Restart Network: This option will restart and re-
initialize the Wi-Fi Module
Scan Wireless Networks: This will scan for the
network Access Points or Routers connected in
the area.
Explained afterward
Comments to this Manuals